MDF Vs Plywood: Know Which Engineered Wood Is Better
When you are planning your home interior with wood, the first thing you often deliberate about is the quality and grade of wood that you will need for the furniture. There is a wide variety of wooden products available in the market that one can use to make furniture, and out of these options, the ones most commonly compared to each other are MDF and Plywood. While they are both kinds of engineered wood, they vary from each other in a number of manners.
Depending on what use you intend to get out of the wood, you can make a decision on what kind of material you will be using. So, in this article, we discuss the distinguishing characteristics of MDF and Plywood to help you make an informed choice between the two- have a look!
MDF vs Plywood: What is the Difference?
MDF or medium-density fiberboard is a type of engineered wood that is made by breaking down the fibres of hardwood and softwood. As they are made up of fibres, MDF has no visible wood grain or knots in it. The fibres are combined through the use of wax and resin, pressed together with heat.
Plywood, on the other hand, is made by glueing together thin sheets of wood veneer between high-quality veneers. These core veneers can be laid longitudinal or horizontal, or even in a hybrid manner to give the wood extra strength.
- Water Resistance
MDF is not moisture resistant, which means that in the presence of moisture, the wood can warp, rot, swell, and show damage. This is why MDF is generally not used in areas of high moisture.
Plywood has many grades, most of which show phenomenal moisture resistance, and in some premium cases, waterproofing as well. This is one of the primary reasons why plywood is preferred over MDF in kitchens and bathrooms.
Because of being denser than plywood, a sheet of MDF will be heavier than a plywood of the same proportions. You can create durable yet lighter furniture with plywood.
- Durability and Strength
MDF is a comparatively softer material, which means that it can sag and even split under heavy weight or pressure. If you are planning to make a longitudinal surface with MDF, you may need to reinforce it from beneath.
Plywood has excellent durability and strength. It has more flex than MDF. This means that under excessive weight, the plywood would bend more than MDF, which may straightforwardly break.
- Screw Holding Capacity
Because it’s made of fibres and is generally softer, MDF has a very low screw anchoring property. If your project needs a lot of screws and fasteners to hold it together, plywood is a better option.
Obviously, when you are using wood for interior, you will need to cut the boards to the appropriate size for them to be used. Due to the composition of MDF, it creates a lot more sawdust when cut as compared to Plywood/ Masks and goggles are often recommended when working with MDF or stand anywhere close to where your interior is being made.
Made by bonding the fibres of hardwood and softwood under pressure
Made by glueing wood veneers or thin plies of wood together between high-quality veneers
Not water resistance
Various grades of moisture and water resistance are available
Heavier and Denser
Bends and sags under pressure
Highly durable and has good weight-bearing capabilities
Cannot hold screws
Good for holding the furniture together with screws
Creates a lot of dust when cut
Creates less dust when cut
At Sylvan Ply, one of the best plywood brands in India, we provide premium quality chemical treated plywood that prevents borer and termite attacks with a lifetime warranty. Send in your inquiries for a quote on our products today.